Plenty of wheel bearings are designed to withstand a lot of pressure and harsh environments. But they can only last for so long until the repetitive stress and strain takes its toll. Here are signs you’ll need to scout around for Rexnord bearings in Texas pretty soon:
Snapping or clicking
This can be due to too much bearing endplay. If the clamping isn’t sufficient, drivers can hear snapping, popping or clicking sounds whenever they make sharp turns.
Grinding
This usually points to a mechanical damage in your car’s wheel-end parts and system. If the issues are related to your bearings, then it could mean that your roller or raceway bearings are worn out or damaged. The grinding sounds emerge whenever one turns or there’s a change in the vehicle’s load.
Knocking
While this isn’t solely attributed to bearing problems, if your bearing is damaged in any way, that could be why you’re hearing knocking sounds when you reverse or change directions.
Tire wear
It’s normal for your tires to wear out. But not if it happens unevenly. That’s a likely sign of wheel bearing problems. When you shop for replacements, it’s a good idea to change both bearings on the same axle or even for all your tires. That way, you won’t have to worry about uneven wear and tear.
Vibrations
If there are vibrations along your wheel while you drive, that could be because of worn-out wheel bearings. Don’t put off dealing with this problem. It might not seem as serious but the longer you put off installing a replacement, the bigger the problem will get.
Buying a new one
With these signs, it’s easy enough to tell when your bearings are going bad. Make sure you read the signs right so you can order replacement Rexnord bearings in Texas ahead of time.
