When someone moves into an older home, they may discover that the heating and cooling systems are in need of maintenance. Failure to upkeep the maintenance of these systems could lead to lower efficiency levels as well as air quality problems within the home. Here are some steps one can take to make sure their heating and air conditioning is working in the best condition possible.
It is important to take the time to clean out the heating unit before it is time to use it to warm the home. The combustion chamber in a furnace should be cleaned out in its entirety. Use a wire brush to scrape charred remains from the chamber’s interior walls and remove the debris with a shop vacuum. The air filter should be swapped with a new one at this time as well. This will ensure the air that comes out of heating vents is free of allergens and dust.
When it is time to switch to air conditioning, all components should be checked over and cleaned before using the system. The condenser outdoors can be cleaned with a vacuum cleaner attachment. The blades on the fan should be wiped down to remove any debris that may have accumulated during the winter. It is best to place a cover on this portion of the system during cool weather to avoid pest invasions and excessive moisture buildup inside.
The evaporator portion of the system will need to be serviced by a company that does commercial heating and cooling near Holly Springs. They will remove the cover and use the appropriate equipment to remove debris from inside. The air filter should once again be swapped with a new one to keep the air quality fresh. It is also best to remove the tubing running from the water pump to the evaporator to check for algae accumulation. This can be rinsed and dried before replacing.
If someone finds their heating or cooling system is not working as it should, a call for repair may be necessary. Call a company adept in commercial heating and cooling installation near Holly Springs to handle the evaluation of the unit. Get more information at AnyDay Heating & Cooling.
