Import car repair companies in Forest Lake MN fix problems that develop with vehicles over time and also offer preventive maintenance services to avoid breakdowns. Most vehicle owners get the car’s or truck’s oil changed on a regular basis, either according to the manual’s recommendations or on some other schedule they feel is most reasonable. During a full-service oil change, automotive technicians commonly also top off fluids other than oil if necessary, including containers with fluid for brakes, the clutch, the automatic transmission and the coolant system.
Many vehicle owners never bother to have the coolant system flushed and replaced with all new solution, even though that is beneficial for the health of the engine. The solution in the system runs from the radiator through hoses into engine components, keeping the engine at an optimum temperature and preventing it from overheating. Over time, that solution picks up contaminants and becomes noticeably dirty.
In Minnesota, people tend to think of the solution that goes into the radiator as antifreeze and, technically, it is labeled as antifreeze/coolant. An equal blend of chemical solution and distilled water keeps the system functioning at peak level. Without enough water, the solution is too thick to be as effective in cooling the engine. With too much water, the solution does not have enough coolant and is also is more vulnerable to freezing in harsh Minnesota temperatures. If the fluid in the radiator freezes while the car is parked for several hours or overnight, it’s possible that the radiator will crack. One of the Import Car Repair Companies in Forest Lake MN would likely need to replace the radiator, which is not a cheap project.
The vehicle owner’s manual suggests how often to have coolant service done by a service center such as American Imports. Common recommendations are every 30,000 or 40,000 miles. A technician drains the old solution, flushes the system with water, and then adds new antifreeze/coolant. The engine now should run at the correct temperature and more efficiently. Removing the contaminants from the system also helps increase the longevity of all the components the chemicals run through.
