Cooling a home in the warm summer months is essential to keeping everyone in the home comfortable. In the Midwest, the hot summer months come quickly and often bring a great deal of humidity with them. An HVAC system needs to be installed properly in order for it to function at peak efficiency all season long, and for many years to come. The first thing with an installation is getting the air conditioning unit on a perfectly level surface. This is typically done by putting down a concrete slab and making sure the unit sits level on top of it. The air conditioning unit should also be positioned out of the way of trees or shrubs that might drop debris into the unit.
Finding a good location for one of the many HVAC Cincinnati units that are available should be a relatively easy process. The next step for a homeowner is making sure they get a unit that is the proper size for their home. A unit that is too small will not be able to keep up with the cooling demands on the hottest summer days. A unit that is too large will not maintain the proper amount of humidity in the air. The best way to ensure the right size unit is installed is to rely on the experts to take measurements and give a recommendation.
Efficiency is the next thing to look at when going over the HVAC Cincinnati options. As of 2006, all air conditioning units have to have a SEER rating of 13 or higher. Before this, the minimum standard was 10 SEER. This means that even the most minimal air conditioning units are going to cool thirty percent more efficiently than older units. The higher the SEER rating, the more efficiently the unit is going to run.
Some final considerations for any air conditioning unit installation deal with the proper maintenance of the unit. The first key to keeping the unit running at peak efficiency is to replace the air filter as often as needed. Most filters are replaced monthly, but some are replaced every three months. The other thing that any homeowner can do is have the air conditioner tuned up every season to ensure the coolant levels are good, and to make sure the compressor is working properly.
